Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Engine Oil Level of a Peugeot Car

Model: Peugeot Peugeot Various
Part: Engine oil

In this video, follow Peugeot's tips for keeping an eye on the engine oil level. First, park the car on a flat surface and ensure the engine has been off for at least ten minutes before checking the oil. Open the bonnet and pull up the dipstick, clean it with a cloth, then reinsert it. Pull it out again and check where the oil level is; it should be near the maximum level. If it's below, you need to add oil. Open the filler cap and pour in a small amount, then measure again. The level must never exceed the maximum! Use only the correct oil: not all oils are the same.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Peugeot 504
How to Change the Engine Oil and Oil Filter on a Peugeot 504
Peugeot Peugeot Various Here are the instructions to perform routine maintenance by changing the engine oil and oil filter on a Peugeot 504. First, lift the vehicle and begi…
How to solve the oil pressure problem on the 1.2 Pure Tech Peugeot engine
How to solve the oil pressure problem on the 1.2 Pure Tech Peugeot engine
Peugeot Peugeot Various A common problem that tends to occur frequently on Peugeot's 1.2 Pure Tech engines is oil pressure issues, which are indicated by the oil pressure wa…
The 1.2 Puretech engine
The 1.2 Puretech engine
Peugeot Peugeot Various In this video we talk about the issues found on the Peugeot 1.2 Puretech engine, an engine that suffers from the destruction of the timing belt, imme…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos