Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Heating Fan from Peugeot 405

Model: Peugeot Peugeot Various
Part: Blower motor

Video tutorial

Learn how to remove the heating air fan from a Peugeot 405. Enter the car door and remove the plastics under the dashboard (right side). Once you locate the air fan, unscrew the securing screws and remove it. Disconnect the large connector of the resistor (if damaged).

Install the new fan and screw in the securing screws (connect the power connector). Close the compartment dedicated to the fan with its cover.

Check the operation of the fan: replace the operating fuse if damaged.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to Understand the Fuse Diagram of a Peugeot 405
Peugeot Peugeot Various In this tutorial, you can observe the diagrams related to the arrangement of the fuses in a Peugeot 405. The first fuse box is located inside the veh…
Guide to replacing the clutch cable of the Peugeot 405
Guide to replacing the clutch cable of the Peugeot 405
Peugeot Peugeot Various This guide provides the main instructions for removing and replacing the clutch cable of the Peugeot 405. First, open the bonnet of your car and loca…
What is the Fuse Diagram for the Peugeot 405 Diesel?
What is the Fuse Diagram for the Peugeot 405 Diesel?
Peugeot Peugeot Various The location of the fuses must be clear before addressing the topic of their wiring diagram. In the Peugeot 405, as shown in the video above, there i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos