Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the BSI Module in a Peugeot?

Model: Peugeot Peugeot Various
Part: Warning light – error code

Video tutorial

In this tutorial, you will see how to reset the BSI module in a Peugeot, a very simple and quick operation to perform if any of the various devices show signs of malfunction. First, enter the cabin, then insert the key, open the driver's door, and wait for the beep to finish.

Next, turn on the instrument panel, switch it off, grasp the two control levers, and hold them towards you. At this point, wait for the horn to sound, close the door, and check that the reset was successful by starting the vehicle.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

Reset procedure for the BSI module of Peugeot and Citroen
Reset procedure for the BSI module of Peugeot and Citroen
Peugeot Peugeot Various In this video we can see how to reset the BSI (or BSM) module of Peugeot or Citroen cars in models from 2004 onwards. The reset is applied when the c…
How do you reset the BSI unit of Peugeot cars?
How do you reset the BSI unit of Peugeot cars?
Peugeot Peugeot Various The BSI control unit installed on board Peugeot vehicles can be reset by connecting a diagnostic tool to the OBD port located on the dashboard just b…
How do you reset the BSI unit of Peugeot?
How do you reset the BSI unit of Peugeot?
Peugeot Peugeot Various In order to reset the BSI unit of a Peugeot, you will need to connect a diagnostic tool to the OBD port of the vehicle: this port is located on the d…

    Frequently Asked Questions

    • Peugeot Vari - What does error code b1003 indicate in Peugeot cars? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos