Do it yourself
Frequently asked questions about cars and motorcycles

Reset procedure for the BSI module of Peugeot and Citroen

Model: Peugeot Peugeot Various
Part: Control unit

In this video we can see how to reset the BSI (or BSM) module of Peugeot or Citroen cars in models from 2004 onwards. The reset is applied when the car does not start and various functions of our vehicle stop working, such as windshield wipers, lights and other features. Following the indications of the youtuber, the procedure to follow is this: turn on the instrument panel: it is important that the driver's window is down. Turn off the panel, keeping the door closed, wait three minutes. Disconnect the positive pole of the battery and wait fifteen seconds. Reconnect it and wait another ten seconds. Get back in the car and move the turn signal lever down. Turn the key on and start the car.

Posted on 14 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot Peugeot Various In this tutorial, you will see how to reset the BSI module in a Peugeot, a very simple and quick operation to perform if any of the various devices s…
Peugeot Peugeot Various The BSI control unit installed on board Peugeot vehicles can be reset by connecting a diagnostic tool to the OBD port located on the dashboard just b…
Peugeot Peugeot Various Intelligent Service Unit, this is the meaning of the acronym BSI and refers to Peugeot cars. In Italian, it translates as Intelligent Service Control…

Other guides you may be interested in

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos