Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Peugeot 308 MK2

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Cabin air filter

See other generations:
Video tutorial

The cabin filter on the Peugeot 308 MK2 is located on the passenger side, behind the side panel of the dashboard. To access it, remove the two plastic clips with a screwdriver and detach the panel.

The filter housing is secured by a cover: press the tab with your thumb to unlock it. Remove the old filter, taking care not to spread dirt in the cabin. Before inserting the new filter, vacuum the housing to remove debris.

The new filter has an arrow indicating the direction of airflow: it must be oriented from front to back. Insert the new filter into the housing, refit the cover (first engaging the two securing tabs), and close the panel.

Reattach the clips. The replacement is simple and quick.


Posted on 22 July 2026 by ScegliAuto


Related tutorials

How do you replace the cabin filter in a Peugeot 308?
How do you replace the cabin filter in a Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To replace the cabin filter of the Peugeot 308, you need to loosen the rivets that secure the cover panel of the footwell on the passenger side. Once…
How to Replace the Cabin Filter in a Peugeot 308 1.6 HDi?
How to Replace the Cabin Filter in a Peugeot 308 1.6 HDi?
Peugeot 308 (2013-2021 / T9, MK 2) To replace the cabin filter in the Peugeot 308, detach the plastic cover on the side of the footwell on the passenger side. Once this has been remove…
How to Replace the Cabin Filter in a Peugeot 308?
How to Replace the Cabin Filter in a Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) In this video, you can see where the cabin filter is located in the Peugeot 308 and how to proceed if you need to replace it, a very simple and quick…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos