Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

In the video tutorial, you can see how to remove the rear light of a Peugeot 308. To start, open the tailgate. On the inside of the light, visible with the tailgate open, you will find 2 Torx screws.

Unscrew them completely. At this point, go outside and grasp the light: pull it backwards, parallel to the side, as it is held by locating pins in addition to the screws.

Do not pull outwards or sideways to avoid breaking them. Once removed, disconnect the electrical connector.

To reassemble, connect the plug, reinsert the pins, push the light until it is flush, and re-screw the screws.


Posted on 12 August 2026 by ScegliAuto


Related tutorials

How to Remove the Original Radio from a Peugeot 308
How to Remove the Original Radio from a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the original radio from a Peugeot 308? Follow these steps carefully to carry out the removal. Obtain the original or aftermarket me…
How to Replace the Rear Light on a Peugeot 308
How to Replace the Rear Light on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Let's see how to replace the rear light on a Peugeot 308. Open the boot lid, remove the side plastics; unscrew the fastening nuts located at the side…
How to Remove the Rear Door Panel of a Peugeot 308
How to Remove the Rear Door Panel of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How to remove the right rear door panel of a Peugeot 308? Follow these steps. Before starting the disassembly, disconnect the battery terminals locat…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos