Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on the Peugeot 308 I

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

To remove the front door panel on the Peugeot 308 I, the fastening points are clearly visible; in the glove compartment, you will find a round plastic cap with a cross-head screw at the bottom, which needs to be removed; behind the internal handle, there is a small rectangular cap; lift it and you will find another cross-head screw underneath to remove.

Also, remove the cover of the window lifter by prying upwards to release the clips.

Here too, you will see a cross-head screw. In some versions, there may be an additional screw under a cap in the top rear corner of the panel (near the mirror).

Now unlock the panel starting from the lower edge, using a plastic tool to unclip all the clips by 'walking' along the perimeter. The part under the glass is simply resting; you will need to lift the entire panel upwards.

Disconnect the electrical connector of the window lifter and the mechanical lock cable, and the panel is free.


Posted on 26 August 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of a Peugeot 308
Removing the Door Panel of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today, we will see in this video tutorial how to remove the front door panel of the Peugeot 308, following the instructions below. First, open the fr…
How to remove the front door panel of the Peugeot 308
How to remove the front door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Today’s steps will illustrate the procedure for removing and replacing the front door panel of the Peugeot 308. First, open the front door and start …
How to Remove the Front Door Panel of the Peugeot 308
How to Remove the Front Door Panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this mini guide for Peugeot 308 T9 owners, discover the steps to remove the front door panel. First, open the door and remove the plastic cover ne…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos