Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Arm on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Control arm

How do you change the wishbone on a Peugeot 208? Let's see how to disassemble the front arm. First, place the car on a column lift and loosen the wheel nuts with a socket wrench. Then, lift the car to a comfortable height and remove the wheel. Use a socket to unscrew the lower tightening bolt of the arm and the bolt mounted under the wheel hub. Unscrew the bolts on the upper part of the arm (as shown in the video). Remove the arm from the bolt housing with the help of a pry bar. Always compare the parts to be replaced with the new ones; if they are suitable, you can install them. Now, begin the installation of the new part: insert the arm into the two ends of the guides and tighten all the bolts and components.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Peugeot 208 windshield wiper blades
How to replace the Peugeot 208 windshield wiper blades
Peugeot 208 (2012-2019 / A9, MK 1) Today we will illustrate the steps to be carried out independently to replace the wiper blades of a Peugeot 208 model 1. The first step is to lift th…
How to Change the Time on a Peugeot 208 II Series
How to Change the Time on a Peugeot 208 II Series
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) Let's see how to change the time on a Peugeot 208 II series: turn on the vehicle's multimedia system, touch the screen, and press the "menu" icon, th…
How to Replace the Clutch Discs on the Peugeot 208
How to Replace the Clutch Discs on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Below are the steps to remove and replace the clutch discs on the Peugeot 208. First, raise the vehicle and begin by removing the front right wheel; …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos