Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wishbone on Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Control arm

See other generations:
Video tutorial

In this video tutorial, you will find instructions to remove and replace the wishbone on a Peugeot 208, following the steps outlined below. First, lift the vehicle on the affected side and remove the front wheel by unscrewing the bolts; then, apply some penetrating oil to the wishbone bolts and use a socket spanner to unscrew the nuts found on both the braking system and the opposite side, as shown in the video.

At this point, disconnect the driveshaft from the brake and remove the wishbone; follow the video to the end for the replacement!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Change the Arm on a Peugeot 208
How to Change the Arm on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) How do you change the wishbone on a Peugeot 208? Let's see how to disassemble the front arm. First, place the car on a column lift and loosen the whe…
How to Replace the Clutch Discs on the Peugeot 208
How to Replace the Clutch Discs on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Below are the steps to remove and replace the clutch discs on the Peugeot 208. First, raise the vehicle and begin by removing the front right wheel; …
How to Reset the Service Light on the Peugeot 208
How to Reset the Service Light on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) On the Peugeot 208, resetting the maintenance interval and oil light is done directly from the instrument cluster. With the Peugeot 208 stationary an…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos