Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Touchscreen Monitor on the Peugeot 2008 Second Generation?

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car stereo

See other generations:
Video tutorial

In case the touchscreen monitor installed on the dashboard of the Peugeot 2008 second generation suddenly freezes, it does not necessarily indicate a serious problem; often, it is a software freeze that can be resolved with a simple reset. Here’s how to proceed: Press and hold the Volume and Power buttons simultaneously for fifteen seconds, just long enough for the device to restart, completing the procedure when the Peugeot logo appears on the screen.

No additional actions are required; you are finished.


Posted on 17 September 2026 by ScegliAuto


Related tutorials

In the second series Peugeot 3008, how do you replace the rear windshield wiper?
In the second series Peugeot 3008, how do you replace the rear windshield wiper?
Peugeot 2008 (2019-2026 / MK 2) It should be noted that the video guide presented here was made using the Peugeot 2008 second series, but it is also suitable for the Peugeot 3008 se…
How to reset the onboard computer of the Peugeot 2008?
How to reset the onboard computer of the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) To reset the onboard computer of the Peugeot 2008, first turn on the vehicle's instrument panel. Next, press the "Settings" button on the central tou…
How to Reset the Tyre Warning Light on the Peugeot 2008?
How to Reset the Tyre Warning Light on the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) Resetting the tyre warning light on the Peugeot 2008, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure that…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos