Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Headlining on Peugeot 206 Gti

Model: Peugeot 206 MK 1 - Years 1998-2012

In this video, we will see how to remove the headlining of the Peugeot 206 Gti. First, get inside the vehicle: then unscrew the screws of the sun visor and remove them: also take off the interior light by disconnecting it and the support handles, removing the screws and unclipping them with plastic levers. At this point, remove the headlining: pry at multiple points and pull as it is glued down. Work also on the boot area and then clean the area before reinstalling the new covering. Follow the video until the end for the complete removal of the headlining.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Driver's Seat on the Peugeot 206 cc GTI Mk1
How to Replace the Driver's Seat on the Peugeot 206 cc GTI Mk1
Peugeot 206 (1998-2012 / MK 1) This guide shows how to replace the driver's seat on the Peugeot 206 cc GTI Mk1. Open the vehicle's sunroof and disconnect the battery to prevent any…
How to Remove the Door Panel on Peugeot 206
How to Remove the Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
Removing Door Panel on Peugeot 206
Removing Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Learn how to remove the door cover panel on a Peugeot 206. Remove the cover panel to access the speaker inside the door. Use a lever to remove the pl…

    Frequently Asked Questions

    • 206 1998-2012 - How many km should the Peugeot 206 be serviced? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos