Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Front bumper

Lift the front bonnet to access the various screws securing the front bumper. Remove the securing bolts located at the top of the bumper. Once the screws or plastic rivets at the top are removed, undo the bolts of the splash guards and finally remove the bolts located at the bottom of the bumper. Pull the bumper away from the vehicle body by hand. Position the new bumper onto the vehicle body and tighten all screws around the splash guard and across the entire bumper.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front bumper of the Peugeot 307
How to disassemble the front bumper of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) The removal of the front bumper of your Peugeot 307 is a simpler operation than you might imagine. First of all, you need to turn off the car, then l…
Removing Front Headlight on Peugeot 307 - 307 SW
Removing Front Headlight on Peugeot 307 - 307 SW
Peugeot 307 (2001-2009 / MK 1) Learn how to remove and replace the front headlight and its bulbs on a Peugeot 307 and 307 SW. First, open the bonnet of your car and remove the plas…
How to Replace the Radiator Fan on the Peugeot 307
How to Replace the Radiator Fan on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) This guide outlines the steps to remove and replace the cooling radiator fan on the Peugeot 307. First, open the bonnet and start by removing the fro…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos