Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 3008
  6. : Removing the front bumper on Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 P84, MK 2 - Years 2016-2023
Part: Front bumper
Operation: Removing the front bumper on Peugeot 3008

Raise the hood and put on the appropriate support rod. Loosen the bolts of the two front wheels and raise the front of the car possibly with two jacks (one on each side). Unscrew the screws and remove the clips that secure the wheel arches, then remove them. Do the same thing with the car cover placed under the hood. At this point, unscrew the bolts that secure the rear bumper. Now move on to the easier part, that is to unscrew the screws that secure the bumper in the upper part, the one next to the hood. Pry upwards with a flat screwdriver and slowly extract the bumper from its seat.


Posted on 9 January 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos