Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to replace the dashboard bulb of a Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Interior lights ceiling light bulb
Operation: How to replace the dashboard bulb of a Peugeot 207

Before we can start, we will have to go and sit on the driver's seat of our Peugeot 207. Let's start by disengaging and removing the inserts positioned around the central dashboard. Then, using the special extractor keys, we will have to remove the car radio, and then disconnect the relative plugs. By doing so, we will have discovered the screws that secure the air conditioning panel, which we will have to unscrew and remove using the Torx screwdriver. Once we have unscrewed the screws, we can extract the air conditioning panel, and we will have reached the burned out bulb. At this point, we will have to go to disengage and remove the burnt out bulb, and we will have finished the disassembly. To fit the new bulb and reassemble everything we will have to follow this procedure in reverse, and the replacement will be completed.


Posted on 10 January 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos