Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Panel on a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

Remove the small screw cover inside the armrest and unscrew the underlying screw, then move to the bottom of the panel and unscrew the other screw present. That's it! Indeed, there is nothing holding the rear door panel on the Peugeot 308 except these two screws.

This means that once these are removed, you can simply pry all around the panel, gradually pulling it out of its seat until fully removed. If you also want to remove the external handle, simply move the seal in the side area of the door and unscrew the screw that secures it.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Peugeot 308?
How to Remove the Rear Light of a Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) Hello! Today's guide aims to remove the rear light of our Peugeot 308. Start by opening the boot lid. Then, unscrew and remove the screws that secure…
How do you replace the rear windshield wiper of the Peugeot 308?
How do you replace the rear windshield wiper of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) In order to replace the rear wiper of the Peugeot 308, you need to pry with an object so that you can completely detach the small trim panel located …
How to Remove the Rear Light of the Peugeot 308?
How to Remove the Rear Light of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the rear light of the Peugeot 308, open the tailgate to detach the plastic panel inside the boot corresponding to the light to be removed. …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos