Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How do you remove the rear light of the Peugeot 308?

Peugeot 308 - Video tutorial

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Tail light
Operation: How do you remove the rear light of the Peugeot 308?

To remove the rear light of the Peugeot 308, you need to open the rear door so that you can detach the plastic panel inside the trunk corresponding to the light to be removed. After this panel has been removed, you can access the underlying knobs, which must be unscrewed and completely removed so that the light can be removed from its housing. After disconnecting the connectors, it will be possible to completely remove the light so that the new one can be connected and fixed with the appropriate screws.


Posted on 24 June 2023 by ScegliAuto



How to disassemble the rear headlight of a Peugeot 308?
Peugeot 308 (2013-2021 / MK 2, T9) Good morning! Today's guide aims to dismantle the rear light of our Peugeot 308. Let's start by opening the rear door of the trunk. After that, we wi
How to replace the rear lights on the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) In this tutorial, we can see how to replace the rear lights in the Peugeot 308, an extremely simple and fast operation. First of all, make sure that
Remove the rear light of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How to remove the rear light of a Peugeot 308? Very simple operation, we see in this video how to proceed. We lift the hood of the luggage compartmen

    Frequently Asked Questions

    • 308 2013-2021 - Why is the stop light of the Peugeot 308 not working? Read Answer
    • 308 2013-2021 - How to replace the reversing light bulb on the Peugeot 308 SW? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos