Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb of a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

If you are looking for a guide to help you replace the rear light bulb of your Peugeot 308, read the following instructions and follow the steps described. First, lift the rear bonnet of the car, then locate the protective cover on the side of the boot and remove it by hand.

Once removed, unscrew the safety catch and then detach the light unit that needs replacing. Finally, remove the faulty bulb and replace it with a new one.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Peugeot 308
How to Replace the Rear Light Bulb on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) To replace the rear light bulb on a Peugeot 308, open the tailgate and detach the carpet covering the rear light area. Under this carpet, you will fi…
How to replace the rear headlight bulb of a Peugeot 308?
How to replace the rear headlight bulb of a Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To replace the rear headlight bulb of a Peugeot 308, start by opening the trunk to access the back of the headlight. Locate the plastic cover that pr…
How to Replace the Front Headlamp Bulb on a Peugeot 308
How to Replace the Front Headlamp Bulb on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Before you start, open the bonnet of your Peugeot 308. First, disconnect the connector that powers the front headlamp. Next, unclip and remove the re…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos