Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of a Peugeot 308?

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

To replace the rear headlight bulb of a Peugeot 308, start by opening the trunk to access the back of the headlight. Locate the plastic cover that protects the bulb housing; it is usually found inside the trunk, next to the side edge.

Remove this cover carefully, using a screwdriver if necessary to gently pry it open, and thus access the back of the headlight. Inside, you will find the bulb holder secured with a clip or a screw, which you will need to remove.

Remove the bulb holder by pulling it out carefully and locate the faulty bulb. Remove the burnt out bulb by slightly twisting it, then insert the new bulb, making sure it is securely in place.

Reassemble the bulb holder and check that the new bulb is working properly before closing everything back up. Finally, screw or reattach the bulb holder and put the protective cover back in place. This procedure allows you to complete the replacement without difficulty and restore the proper functioning of the rear headlight.


Posted on 26 May 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Peugeot 308
How to Replace the Rear Light Bulb on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) To replace the rear light bulb on a Peugeot 308, open the tailgate and detach the carpet covering the rear light area. Under this carpet, you will fi…
How to Replace the Rear Light Bulb of a Peugeot 308
How to Replace the Rear Light Bulb of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) If you are looking for a guide to help you replace the rear light bulb of your Peugeot 308, read the following instructions and follow the steps desc…
How to replace the rear headlight bulb of the Peugeot 308
How to replace the rear headlight bulb of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) The steps to replace the rear light bulb of the Peugeot 308 model 1, produced from 2007 to 2014, are simple and quick to perform independently. To ma…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos