Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Tail light

Hello! Today's guide aims to remove the rear light of our Peugeot 308. Start by opening the boot lid. Then, unscrew and remove the screws that secure the rear light to its housing. At this point, extract the light from its housing, then disconnect the corresponding electrical connector. Once you have completed this last step, you will have finished the procedure for removing the rear light of our Peugeot 308. Thank you for following along!

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Rear Light on Peugeot 308
Remove Rear Light on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Replace the rear light on a Peugeot 308 if damaged. Open the boot lid, remove the inspection cover (located at the side of the boot). Unscrew the ret…
How to Replace the Rear Headlight Bulbs on a Peugeot 308
How to Replace the Rear Headlight Bulbs on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Are the rear lights on your Peugeot 308 SW not working? This video shows how to replace the damaged bulbs. Open the boot lid, and using a screwdriver…
How to replace the rear headlight bulbs of the Peugeot 308
How to replace the rear headlight bulbs of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The following steps will show us how to disassemble and replace the bulbs of the rear headlight of the Peugeot 308. First, we open the rear door of t…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos