Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : Remove the rear light of a Peugeot 308

Peugeot 308 - Video tutorial

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Tail light
Operation: Remove the rear light of a Peugeot 308

How to remove the rear light of a Peugeot 308? Very simple operation, we see in this video how to proceed. We lift the hood of the luggage compartment, then, we remove the cloth cap placed on the side trim of the luggage compartment. We unscrew the plastic nuts that tighten the rear light, disconnect the power terminals connected to the light and pull it away from the body. We replace the damaged bulbs with new ones (same voltage). We reassemble the headlight with the respective tightening nuts, replace the inspection cap and finally test the correct functioning of the lights.


Posted on 26 November 2023 by ScegliAuto

This video is currently unavailable


How to disassemble the rear headlight of a Peugeot 308?
Peugeot 308 (2013-2021 / MK 2, T9) Good morning! Today's guide aims to dismantle the rear light of our Peugeot 308. Let's start by opening the rear door of the trunk. After that, we wi
How do you remove the rear light of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the rear light of the Peugeot 308, you need to open the rear door so that you can detach the plastic panel inside the trunk corresponding t
How to replace the rear lights on the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) In this tutorial, we can see how to replace the rear lights in the Peugeot 308, an extremely simple and fast operation. First of all, make sure that

    Frequently Asked Questions

    • 308 2013-2021 - Why is the stop light of the Peugeot 308 not working? Read Answer
    • 308 2013-2021 - How to replace the reversing light bulb on the Peugeot 308 SW? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos