Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor on Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Starter motor

Video tutorial

Replace the starter motor from within the engine bay with a new one. Lift the front bonnet to access the starter motor. Remove the battery and its tray, and also remove the air filter housing.

Locate the starter motor, disconnect the power terminals using pliers or a screwdriver depending on the pressure of the tabs, unscrew the securing bolts of the starter motor with a socket wrench, and remove it from the engine bay. Install the new starter motor by connecting the power cables and securing it with the associated screws.

Refit the battery and the dedicated air filter.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Removing the Starter Motor from the Peugeot 307 1.6 HDI
Removing the Starter Motor from the Peugeot 307 1.6 HDI
Peugeot 307 (2001-2009 / MK 1) Today's main steps will show you how to remove and replace the starter motor on the Peugeot 307 1.6 HDI. First, lift the vehicle and start unscrewing…
How to Remove the Starter Motor from a Peugeot 307
How to Remove the Starter Motor from a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Is the starter motor showing no signs of operation? Here's how to remove it from the engine bay of the 307. Disconnect the starter motor power termin…
How to Remove the Starter Motor from a Peugeot 307
How to Remove the Starter Motor from a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Is the starter motor malfunctioning? Let's see how to remove it from a Peugeot 307. Open the engine bay, disconnect the battery terminals for safety.…

Other guides you may be interested in

    Frequently Asked Questions

    • 307 2001-2009 - Where is the starter on the Peugeot 307 located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos