Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Torsion Bar and Suspension Height on Peugeot 306

Model: Peugeot 306 MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Anti-roll bar

Video tutorial

In this video, we will cover the main instructions for adjusting the vehicle height and the rear torsion bar on a Peugeot 306. Lift the vehicle from the rear and unscrew the bolts securing the anti-roll bar, disconnecting the suspension; then take the correct measurements to lower your vehicle within limits.

By removing the central pin of the torsion bar, you will adjust the suspension height, using a jack; this delicate operation should be performed by experienced mechanics as it can significantly alter the vehicle's handling.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Peugeot 306 (1993-2002 / MK 1) The door wiring on the Peugeot 306 has become damaged due to use, and the constant opening and closing of the doors has damaged the wiring, severing …
Peugeot 306 (1993-2002 / MK 1) Any fuse on the Peugeot 306 is located inside one of the dedicated fuse boxes installed in the vehicle. In this type of car, there is a single fuse b…
Peugeot 306 (1993-2002 / MK 1) The fuses of the Peugeot 306 are contained within the designated fuse boxes installed in the car. In this model, there is a single box for the fuses.…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Battery in a 2022 Toyota Yaris Cross

The battery in the 2022 Toyota Yaris Cross is located under the front bonnet, next to the engine. To replace the battery, open the bonnet and remove the cover on the battery by pressing on the sides. After removing the cover, use a 13mm socket to undo the negative terminal nut, followed by the positive terminal. Remove the old battery and insert the new one. Connect the positive and negative terminals to restore battery function. Close the cover and start the vehicle to test its operation.

Watch the video!


by ScegliAuto

More videos