Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Peugeot 307

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

Before starting, open the rear boot of your Peugeot 307. Begin by unscrewing and removing the screws that secure the rear light to its housing. Next, unclip the rear light from its housing.

By doing this, you will have freed the rear light itself. After that, extract it from its seat.

At this point, disconnect the corresponding electrical connector. Once you complete this last step, you will have successfully finished the removal.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Peugeot 308
How to Remove the Rear Light of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Learn how to remove the rear light of a Peugeot 308. Open the boot lid and secure it; locate the securing screws of the rear light (next to the light…
Remove Rear Light on Peugeot 308
Remove Rear Light on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Replace the rear light on a Peugeot 308 if damaged. Open the boot lid, remove the inspection cover (located at the side of the boot). Unscrew the ret…
How to Remove the Rear Light on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How to remove the rear light on a Peugeot 308? This is a very simple operation; see in this video how to proceed. Lift the boot lid, then remove the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos