Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radio on Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

Push upwards from the bottom on the cover above the dashboard, then detach the side trims using a plastic wedge. Disconnect the left-hand side connector shown in the video and unscrew the two upper screws securing the LCD. At this point, the screen can be released by pushing down on the two upper plastics and pulling the dashboard upwards.

Disconnect the rear connector and remove the screen, then unscrew the two screws securing the radio cover and remove it, then extract the radio itself. Reverse the process for reassembly.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Disassembly of the central display of the car radio and the air vents of the Peugeot 208.
Disassembly of the central display of the car radio and the air vents of the Peugeot 208.
Peugeot 208 (2012-2019 / MK 1, A9) In this short guide, we will see the instructions that will allow us to disassemble the central display of the car radio and the central air vents of…
Guide to the Peugeot 208 Radio Functionality
Guide to the Peugeot 208 Radio Functionality
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) This guide briefly outlines the main steps to discover the new features of the standard radio in the Peugeot 208. First, get in the vehicle and turn …
How do you reset the radio of the Peugeot 208?
How do you reset the radio of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) In order to reset the radio of the Peugeot 208, you need to remove the dashboard panel located in the bottom left part compared to the steering colum…

    Frequently Asked Questions

    • 208 2019-2026 - Why is the USB port not working in the Peugeot 208? Read answer
    • 208 2012-2019 - Why is the car radio of the Peugeot 208 not heard? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos