Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gas Struts on the Boot of the Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Hydraulic pistons

Video tutorial

In today’s video tutorial, you will learn how to remove and replace the gas struts on the boot of the Peugeot 207, as well as on the 206, 208, and 307, in simple and quick steps. First, open the boot and start by removing the gas struts; to do this, first unclip them from the bottom, then unclip the tab upwards, as shown in the video.

At this point, you can remove and replace the gas struts with new ones of the correct type and the same length; then reassemble everything, following the video tutorial to the end!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Replacing the Tailgate Gas Struts on a Peugeot 207
Replacing the Tailgate Gas Struts on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Open the boot lid and place a support prop underneath. Use a flathead screwdriver to detach the retaining ring that connects the gas strut to the tai…
How to disassemble the interior panel of the rear tailgate of the Peugeot 207
How to disassemble the interior panel of the rear tailgate of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) These short and simple steps will show us how to disassemble and remove the inner panel of the rear trunk door of the Peugeot 207. First of all, we o…
Guide to Replace the Rear Wiper Motor on the Peugeot 207
Guide to Replace the Rear Wiper Motor on the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Today, you will discover the steps to remove and replace the rear wiper motor on the Peugeot 207. First, open the tailgate and start by removing the …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos