Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the interior panel of the rear tailgate of the Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Door trim panel

These short and simple steps will show us how to disassemble and remove the inner panel of the rear trunk door of the Peugeot 207. First of all, we open the trunk door and start disassembling and removing the plastic side pillars, levering on the sides; then we lever on the inner lining of the trunk door to detach and remove it, as shown in the video. At this point, it will be possible to access the trunk lock and the rear wiper motor; finally, we carry out the installation of the trunk panel, applying the reverse procedure!

Posted on 5 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Inner Door Panel of the Peugeot 207
Removing the Inner Door Panel of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) This brief guide will illustrate the steps to remove and replace the inner panel or trim of the front door of the Peugeot 207. First, open the front …
How to Replace the Rear Door Panel of the Peugeot 207
How to Replace the Rear Door Panel of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to remove and replace the rear door panel to install the speaker on the Peugeot 207. First, open the rear …
How to Remove the Door Panel from a Peugeot 207
How to Remove the Door Panel from a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How to remove the door panel (driver's side) from a Peugeot 207? This video explains how to proceed. Before starting the disassembly work, disconnect…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos