Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Glow Plugs from Peugeot 206-207-307 1.6 HDi 75-90 HP

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Glow plugs

Video tutorial

In today's video tutorial, learn how to remove and replace the glow plugs on a Peugeot 307 1.6 HDi. First, open the bonnet of the car and remove the plastic engine cover; locate the glow plugs at the rear of the engine bay. To remove them, take a socket wrench with an extension and unscrew the four glow plugs present, as shown in the video; then, replace them with new ones, using original parts, and install them by hand first before tightening with the wrench.

Finally, connect the electrical connectors!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Replace the Glow Plugs on a Peugeot 307 1.6 HDI
How to Replace the Glow Plugs on a Peugeot 307 1.6 HDI
Peugeot 307 (2001-2009 / MK 1) Here are the main steps that will allow you to remove and replace the glow plugs on a Peugeot 307 1.6 HDI, as well as on all other Peugeot and Citroe…
How to Replace the Glow Plugs on the Peugeot 307 1.6 HDI
How to Replace the Glow Plugs on the Peugeot 307 1.6 HDI
Peugeot 307 (2001-2009 / MK 1) Today's instructions will show you how to remove and replace the glow plugs of the engine in the Peugeot 307 1.6 HDI. First, open the bonnet of the v…
Removing the Starter Motor from the Peugeot 307 1.6 HDI
Removing the Starter Motor from the Peugeot 307 1.6 HDI
Peugeot 307 (2001-2009 / MK 1) Today's main steps will show you how to remove and replace the starter motor on the Peugeot 307 1.6 HDI. First, lift the vehicle and start unscrewing…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos