Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on the Peugeot 307 1.6 HDI

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Glow plugs

Video tutorial

Today's instructions will show you how to remove and replace the glow plugs of the engine in the Peugeot 307 1.6 HDI. First, open the bonnet of the vehicle and start by removing the air filter box located behind the engine, disconnecting the intake hose and unscrewing all the fixing screws; then, you will find the glow plugs underneath, which you will unscrew with a socket wrench, as shown in the video.

At this point, install the new glow plugs of the correct type and with the same thread pitch, following the video tutorial to the end!


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Replace the Glow Plugs on a Peugeot 307 1.6 HDI
How to Replace the Glow Plugs on a Peugeot 307 1.6 HDI
Peugeot 307 (2001-2009 / MK 1) Here are the main steps that will allow you to remove and replace the glow plugs on a Peugeot 307 1.6 HDI, as well as on all other Peugeot and Citroe…
Removing Glow Plugs from Peugeot 206-207-307 1.6 HDi 75-90 HP
Removing Glow Plugs from Peugeot 206-207-307 1.6 HDi 75-90 HP
Peugeot 307 (2001-2009 / MK 1) In today's video tutorial, learn how to remove and replace the glow plugs on a Peugeot 307 1.6 HDi. First, open the bonnet of the car and remove the …
Removing the Starter Motor from the Peugeot 307 1.6 HDI
Removing the Starter Motor from the Peugeot 307 1.6 HDI
Peugeot 307 (2001-2009 / MK 1) Today's main steps will show you how to remove and replace the starter motor on the Peugeot 307 1.6 HDI. First, lift the vehicle and start unscrewing…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos