Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on the Peugeot 207

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Front bumper

In this tutorial, you will see how to remove the front bumper on the Peugeot 307, a very simple operation. First, lift the front axle and remove both wheels, then extract the rivets located inside the wheel arches, 5 on each side. Once done, unscrew the two bolts indicated with a 10mm spanner, unlock the upper clips, and move underneath the vehicle, where you will remove the three screws with a flat-head screwdriver. Finally, at the top of the bumper, remove the 4 plastic rivets and unscrew the two bolts with a Torx T27 spanner. At this point, the bumper is free to be removed from the chassis.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front bumper of the Peugeot 307
How to disassemble the front bumper of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) The removal of the front bumper of your Peugeot 307 is a simpler operation than you might imagine. First of all, you need to turn off the car, then l…
Removing the Front Bumper on Peugeot 307
Removing the Front Bumper on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Lift the front bonnet to access the various screws securing the front bumper. Remove the securing bolts located at the top of the bumper. Once the sc…
How to Remove the Front Bumper on Peugeot 307
How to Remove the Front Bumper on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Is the front bumper damaged? Here’s how to remove it from a Peugeot 307. Use a plastic or metal lever to remove the securing rivets located at the to…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos