Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How Can I Replace the Mirror on My Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

Removing the external rear-view mirror from your Peugeot 2008 is easier than you think. The first step is to take off the mirror.

To do this without damaging it, it is advisable to use a rubber lever or protect it with a cloth. Once removed, inside the mirror, you will see 2 clips.

Gently unclip them (again, to avoid damaging them) to also remove the rear cover. At this point, you're done! The video, although in a foreign language, is very intuitive and clearly indicates the steps to complete the task quickly and without issues.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Remove the Mirror from the External Mirror on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To remove the mirror from the external mirror on a Peugeot 2008, use a plastic or rubber-coated lever to pry between the perimeter of the mirror fram…
How to Replace the Ambient Temperature Sensor on the Peugeot 2008
How to Replace the Ambient Temperature Sensor on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this brief guide, we will see step-by-step instructions on how to remove and replace the ambient temperature sensor located on the right-hand rear…
How do you close the external rearview mirror of the Peugeot 2008?
How do you close the external rearview mirror of the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In order to close the external rearview mirror of the Peugeot 2008, you need to insert the ignition key into the corresponding slot: once the key is …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos