Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to replace the battery of the Peugeot 3008?

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 P84, MK 2 - Years 2016-2023
Part: Battery
Operation: How to replace the battery of the Peugeot 3008?

In the event that it is necessary to disassemble to replace the car battery, the following steps must be followed: open the bonnet, the battery is located in the upper part of the engine compartment near the air filter box. First proceed to extract the plastic cover that protects it, after which loosen the negative pole clamp and immediately after the positive clamp. At that point it will be possible to remove the battery and replace it with a new one of the same power (see use and maintenance manual). finally, reassemble the various components, always connecting the positive pole of the battery first.


Posted on 8 May 2024 by ScegliAuto

    Frequently Asked Questions

    • 3008 2009-2016 - Where is the battery of the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why is the Peugeot 3008 Start & Stop system not working properly? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos