Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reprogram the Key of a Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Key

To reprogram the remote key of your vehicle, you will need a diagnostic system that you should connect to the OBD2 port of the car. First, select the make and model of your vehicle, wait for the data to be read from the ECU, and the corresponding PIN code of the key that will already be inserted in the ignition. Once the system verifies the correctness of the PIN, you can turn off the ignition, wait 15 seconds, remove the key from the ignition switch, and insert the key to be programmed. Then, confirm on the display to transfer the PIN to the new key, and at that point, the copy will be operational.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Program the Remote for the Peugeot 206
How to Program the Remote for the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Sometimes, after having a repair carried out on your Peugeot 206 at a garage, the remote/key may stop working. In these cases, after ensuring that th…
How to reprogram the remote key fob of a Peugeot 206
How to reprogram the remote key fob of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To reprogram the remote key fob of a Peugeot 206, get inside the vehicle, insert the key into the ignition switch and turn the ignition on without st…
How do you program the key of the Peugeot 206?
How do you program the key of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To program the key of the Peugeot 206, you need to connect a diagnostic tool to the OBD port of the vehicle, after inserting the blank key into the k…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos