Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to replace the driver's seat of the Peugeot 206 cc GTI Mk1

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Seat
Operation: How to replace the driver's seat of the Peugeot 206 cc GTI Mk1

The guide shows how to replace the driver's seat on the Peugeot 206 cc GTI Mk1. Open the roof of the vehicle and disconnect the battery to prevent short circuits. At this point it is necessary to remove the four bolts placed at the ends of the seat guides; move the seat to the front end of travel and remove the two bolts on the rear end and vice versa. Lift the seat of the seat and disconnect the electrical connectors and remove the old element. Install the new spare part paying attention to the electrical connections. Check the correct functioning of the seat and the safety systems of the piece.


Posted on 16 May 2024 by ScegliAuto

    Frequently Asked Questions

    • 206 1998-2012 - Why do the front seats of the Peugeot 206 not lock? Read Answer
    • 206 1998-2012 - How do you remove the driver's seat on a Peugeot 206 hatchback? Read Answer
    • 206 1998-2012 - Why does the seat of the Peugeot 206 not lock? Read Answer
    • 206 1998-2012 - How do you fold the rear seats of the Peugeot 206? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos