Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the ECU of a Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Control unit

Video tutorial

If the ECU of your Peugeot 307 has serious operational issues and you need to replace it, this guide is all you need. Read it carefully and apply the instructions provided.

First, switch off the vehicle completely. Lift the bonnet and locate the wiring system on the right side.

Disconnect all the various cables using the small lever, and once done, lift the entire ECU to remove it completely. At this point, simply insert the new ECU and connect the various cables.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Peugeot 307 (2001-2009 / MK 1) To replace the ECU of the Peugeot 307, open the bonnet to access the components located inside the engine bay: first, disconnect the cables connected…
Peugeot 307 (2001-2009 / MK 1) To reset the ECU of the Peugeot 307, connect a diagnostic tool to the vehicle's OBD port: this port is located on the dashboard immediately below the…
Peugeot 307 (2001-2009 / MK 1) In this mini guide for your Peugeot 307, discover where the OBD2 port is located, allowing you to connect any diagnostic tool to identify and resolve…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos