Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the ECU of the Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Warning light – error code

In order to reset the ECU of the Peugeot 307, you need to connect a diagnostic tool to the OBD port of the vehicle: this port will be located on the dashboard just below the steering column. Once the scanner is connected, you can select the model of the car and its corresponding version: at this point, you can follow the tutorial instructions to ensure that the ECU is reset properly. Once the operation is complete, you can disconnect the scanner and turn on the ignition to verify the reset.

Posted on 15 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the BSI unit of the Peugeot 307?
How do you reset the BSI unit of the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) In order to reset the BSI control unit on the Peugeot 307, you need to connect a diagnostic tool to the OBD port of the vehicle, located on the dashb…
How do you reset the BSI unit of the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) The reset operation of the BSI control unit installed on the Peugeot 307 involves connecting a diagnostic tool to the OBD port of the vehicle, which …
How to Replace the ECU of a Peugeot 307
How to Replace the ECU of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) If the ECU of your Peugeot 307 has serious operational issues and you need to replace it, this guide is all you need. Read it carefully and apply the…

    Frequently Asked Questions

    • 307 2001-2009 - If the fuel warning light on my Peugeot 307 no longer works, where do I find the fuse box? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos