Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Peugeot 407 Fuse Box Diagram

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuse box

Video tutorial

This model from the French manufacturer has three fuse boxes. The first is located at the bottom of the dashboard on the left side of the steering wheel, near the driver's door.

The second fuse box is found in the engine compartment, also on the left side, and to access it, you need to remove the battery cover. Finally, the third fuse box is located in the rear boot, again on the left side, and to access it, you must open the flap on the side of the compartment by unscrewing the two screws.

Specifically, the fuse for the front power socket is located in the fuse box in the dashboard and is marked with the number 10. To see details of all other fuses, you need to consult the instruction manual.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Fuse Layout and Positioning for the Peugeot 407
Fuse Layout and Positioning for the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Below, you will find where to locate the fuse layout and diagram for the Peugeot 407 in simple and quick steps. First, open the bonnet of the vehicle…
Diagram and Location of the Fuse Boxes on the Peugeot 407
Diagram and Location of the Fuse Boxes on the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) In this guide, you will discover the diagram and location of the fuse boxes on the Peugeot 407 by following these simple steps. First, get inside the…
Location of the Fuse Box and OBD Port in the Peugeot 407
Location of the Fuse Box and OBD Port in the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) The Peugeot 407 has three fuse boxes. The first fuse box is located in the engine compartment, near the battery. The second fuse box is inside the ca…

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos