Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Peugeot 308 T9

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin air filter is certainly a DIY maintenance task, and the first recommendation is to choose an activated carbon filter. On this model, there are actually two filters located behind the central console of the dashboard.

To replace them, access the cabin from the passenger side and remove the pressure clip located at the centre of the front trim panel of the central tunnel, then remove the panel. At this point, the cap of the cabin air filter housing is easily accessible, allowing you to extract the filters by pulling on the designated tab. Ensure to clean the filter housing thoroughly and insert the new filters before reattaching the cap and panel.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter on Peugeot 308 1.6 HDI
Replacing Cabin Air Filter on Peugeot 308 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to change the cabin air filter on the Peugeot 308. The filter is located under the bonnet: open it, and at…
Replacing the Cabin Pollen Filter on a Peugeot 308
Replacing the Cabin Pollen Filter on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How to replace the cabin pollen filter on a Peugeot 308? In this video, see how to carry out the removal. Use pliers to remove the rivets securing th…
How to Replace the Cabin Air Filter on the Peugeot 308
How to Replace the Cabin Air Filter on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To complete the replacement of the cabin air filter on your first-generation Peugeot 308, follow the procedure described in this guide. First, purcha…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos