Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 301
    4. : Where is the chassis number of the Peugeot 301

Peugeot 301 - Video tutorial

Model: Peugeot 301 MK 1 - Years 2012-2019
Operation: Where is the chassis number of the Peugeot 301

The chassis number of a car can be easily found on the front windshield, on the driver's side, shown on a special plate, in its integral form with all its 17 alphanumeric digits. But that's not the real VIN number. That is: it is in the sense that that is really the chassis number of the car, also reported on the vehicle registration document - check it for yourself - but it is not the "legal" one, that is what the police forces, or the engine engineers will want to see you for a test or verification. Each make, model, year of production, has the chassis number in a different place. The Peugeot 301 shows the "legal" frame, that is the one stamped on the metal on the metal part that remains uncovered in the engine compartment, on the passenger side, next to the cap of the washer fluid reservoir.


Posted on 16 July 2022 by ScegliAuto



Localization and fuse diagram of the Peugeot 301.
Peugeot 301 (2012-2019 / MK 1) In this video we see where to locate the fuse boxes of the Peugeot 301: we find the first box inside the engine compartment, located near the battery
How do I remove the door panel of the Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) In order to remove the door panel of the Peugeot 301 you have to unscrew the screws located in the lower part of the panel, under the rear-view mirro
How to replace the rear lights in the Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) In this tutorial we can see how to replace the rear lights in the Peugeot 301, an extremely simple and quick operation. First of all, make sure that

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos