Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Injector Rail

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Fuel injectors

Video tutorial

The injectors are located at the rear of the engine and are connected to each other via a crossbar known as the rail; it is recommended first, before proceeding with disassembly, to allow the engine to cool to operate safely. Start by disconnecting the components connected to the rail and then unscrewing the fixing bolts; once the rail is free, lift it slowly from its seating to move it away from the injectors that remain fixed to the cylinder head and then disconnect the individual connectors by gently extracting the safety clips.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing Injectors
Instructions for Replacing Injectors
Peugeot 106 (1991-2004 / MK 1) Injectors serve to inject fuel into the combustion chamber, atomising it at high pressure to mix well with the air and create the perfect thermodynam…
Instructions for Removing Front Headlamp
Instructions for Removing Front Headlamp
Peugeot 106 (1991-2004 / MK 1) Removing the front headlamp is very simple and requires no special tools, as it is simply clipped into its housing via two pins on the wing and one o…
Instructions for Removing the Wheel
Instructions for Removing the Wheel
Peugeot 106 (1991-2004 / MK 1) Here’s a video illustrating the various stages of removing a wheel. First, loosen the wheel nuts with the appropriate wrench. (The wrench doesn’t hav…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos