Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Positioning Vehicle on Axle Stands

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Checks and maintenance

Before positioning the axle stand under the vehicle, ensure it has the correct load capacity to support the weight of the vehicle. Next, lift the vehicle with a jack, placing it under a reinforcement rib located beneath the edge of the sill to avoid deforming the bodywork; then insert the axle stand also under a reinforcement rib and lower the vehicle onto the stand: if the support does not appear secure, lift the vehicle again with the jack and reposition the axle stand.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Fuel Filter
Instructions for Replacing the Fuel Filter
Peugeot 106 (1991-2004 / MK 1) The fuel filter is located underneath the vehicle near the left rear wheel: raise the vehicle on suitable axle stands, unclip the retaining strap of …
Instructions for Removing the Front Bumper
Instructions for Removing the Front Bumper
Peugeot 106 (1991-2004 / MK 1) To comfortably remove the front bumper, it is suggested to lift the vehicle on suitable car stands (or on a ramp) and remove the front wheels; at thi…
Replacement of Brake Discs and Front Pads
Replacement of Brake Discs and Front Pads
Peugeot 106 (1991-2004 / MK 1) Lift the vehicle on suitable axle stands (loosen the wheel bolts before lifting the vehicle) and remove the wheels. Remove the retaining clip and the…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos