Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Fuel Filter

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Diesel fuel filter

Video tutorial

The fuel filter is located underneath the vehicle near the left rear wheel: raise the vehicle on suitable axle stands, unclip the retaining strap of the filter and the inlet and outlet pipes (simply press on the release to disconnect them). Then, fit the new filter, ensuring the fuel flow direction indicated by an arrow on the filter itself is respected: connect the pipes and secure it to the vehicle's chassis with the retaining strap.

It is very important to carry out this maintenance periodically to avoid filter blockage that could compromise engine performance.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Peugeot 106 (1991-2004 / MK 1) When changing the engine oil, it is advisable to also replace the filter due to the low cost and ease of installation. After draining the used oil th…
How to Change Fuel Filter on Peugeot 106
How to Change Fuel Filter on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Learn how to change the fuel filter on a Peugeot 106. Lift the car with a jack, then locate the position of the fuel filter. Disconnect the wires and…
Replacing the Air Conditioning Filter
Replacing the Air Conditioning Filter
Peugeot 106 (1991-2004 / MK 1) Obtain a pollen filter of the same model identical to the original. The pollen filter purifies the cabin air and is located in the engine compartment…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos