Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Conditioning Filter

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Air conditioning

Video tutorial

Obtain a pollen filter of the same model identical to the original. The pollen filter purifies the cabin air and is located in the engine compartment under the windscreen.

To access it, first remove the wipers and then the cover using a plastic tool to pry at the edges. Completely remove the wiper mechanism.

Once the filter cover is removed, use a socket wrench to unscrew the bottom of the filter, then carefully pull the filter out of its housing to avoid dispersing dust. Place a cloth on the bottom to catch any dirt.

Reinsert the new filter into the housing, ensuring it is positioned correctly, and replace the cover with the screw and cover.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing the Fuel Filter
Instructions for Replacing the Fuel Filter
Peugeot 106 (1991-2004 / MK 1) The fuel filter is located underneath the vehicle near the left rear wheel: raise the vehicle on suitable axle stands, unclip the retaining strap of …
Replacing the Starter Motor
Replacing the Starter Motor
Peugeot 106 (1991-2004 / MK 1) The starter motor is located on the gearbox at the rear: to access it, you need to get underneath the vehicle, so it is advisable to lift it on a ram…
How to Change Fuel Filter on Peugeot 106
How to Change Fuel Filter on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Learn how to change the fuel filter on a Peugeot 106. Lift the car with a jack, then locate the position of the fuel filter. Disconnect the wires and…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos