Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt on a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: V-belt

To replace the auxiliary belt on a Peugeot 307, you need a 15 mm spanner. Start by opening the bonnet and safely lifting the vehicle with ramps or jacks. Once you locate the belt, remove it and check that all the pulleys rotate smoothly. A new belt, available on major e-commerce platforms, costs between £8.50 and £11.00, depending on the brand. Install it starting from the top pulley, ensuring to follow the rotation direction indicated on the belt. Once installed as shown in the video, tighten the tensioner to achieve the correct tension: this is done by pulling the pulley sideways. At this point, you can lower the vehicle, and the job is complete.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on a Peugeot 307 1.6 HDi
Replacing the Timing Belt on a Peugeot 307 1.6 HDi
Peugeot 307 (2001-2009 / MK 1) In this video tutorial, follow the steps to remove and replace the timing belt, along with the water pump, on a Peugeot 307 1.6 HDi. First, lift the …
How to Replace the Timing Belt on a Peugeot 307 2.0 HDi
How to Replace the Timing Belt on a Peugeot 307 2.0 HDi
Peugeot 307 (2001-2009 / MK 1) Below we will discover how to disassemble and replace the timing belt on a Peugeot 307 2.0 HDi. First, lift the vehicle and start by removing the fro…
When and How to Replace the Timing Belt on the Peugeot 307 1.6 HDI?
When and How to Replace the Timing Belt on the Peugeot 307 1.6 HDI?
Peugeot 307 (2001-2009 / MK 1) This guide provides the main instructions to remove and replace the timing belt on the Peugeot 307 1.6 HDI. First, lift the vehicle and remove the fr…

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos