Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing a Fuse

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

If any function of the vehicle suddenly stops working, the first thing to check is whether it is powered, meaning that voltage is reaching it (use a multimeter or a test bulb): if there is no current, it is very likely that the relevant protective fuse has blown due to abnormal current draw or aging of the fuse itself.

Access the fuse box (usually, the cover will have symbols indicating the correspondence between the fuse and the relevant device), remove the fuse in question and check the continuity of the protective strip: if it is open, then the fuse is blown and must be replaced with one of the same rating (check the Ampere value indicated on the fuse or adhere to the colour): using a fuse with a higher rating could damage the component.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to replace the horn fuse of the Peugeot 206
How to replace the horn fuse of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will explain how to replace the horn fuse of the Peugeot 206. To perform the fuse replacement, we need to open the front hood and release th…
Instructions for Fuse Replacement
Instructions for Fuse Replacement
Peugeot 206 (1998-2012 / MK 1) If one of the electrical devices in the vehicle does not activate, the first thing to check is the integrity of the corresponding protection fuse; th…
Where is the fuel injector fuse located on the Peugeot 206?
Where is the fuel injector fuse located on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) When the car has issues with fuel injection, the cause is not always related to the fuel pump or injectors; sometimes it is simply a blown fuse that …

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos