Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How do I deactivate the ECO mode of the Peugeot 207?

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Checks and maintenance
Operation: How do I deactivate the ECO mode of the Peugeot 207?

In order to deactivate the ECO mode of the Peugeot 207 there is no procedure that must be carried out from the central display of the dashboard: to remove this mode it is necessary to open the bonnet to access the engine compartment. It will be necessary to open the fuse box located next to the battery, in correspondence with the left headlight. Once opened, it will be necessary to disconnect the connector in the upper part of the box that is shown in the video and leave it disconnected for a few minutes. By plugging it in after this time, it will be possible to verify that the ECO mode has been deactivated.


Posted on 12 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 207 2006-2015 - Why did the pollution control system light turn on in the Peugeot 207? Read Answer
    • 207 2006-2015 - What is the meaning of the message "Eco Mode Activated" in the Peugeot 207? Read Answer
    • 207 2006-2015 - How do you activate the automatic door lock on the Peugeot 207? Read Answer
    • 207 2006-2015 - Where does the hood of the Peugeot 207 open from? Read Answer
    • 207 2006-2015 - What does the steering wheel warning light indicate in the Peugeot 207? Read Answer
    • 207 2006-2015 - When does the message "anti-theft electronic anomaly" appear in the Peugeot 207? Read Answer
    • 207 2006-2015 - Where is the mf10 fuse located in the Peugeot 207 petrol? Read Answer
    • 207 2006-2015 - Where is the Peugeot 207 horn located? Read Answer
    • 207 2006-2015 - What causes the power steering problem on Peugeot 207? Read Answer
    • 207 2006-2015 - Where is the fuse table on the Peugeot 207? Read Answer
    • 207 2006-2015 - What to do if I have problems with the Peugeot 207 ESP system? Read Answer
    • 207 2006-2015 - What does the warning light with a triangle and an exclamation point mean in the Peugeot 207? Read Answer
    • 207 2006-2015 - Where is the ABS fuse located in the Peugeot 207? Read Answer
    • 207 2006-2015 - How much is the set of brake discs and pads for Peugeot 207? Read Answer
    • 207 2006-2015 - Why does the central locking on Peugeot 207 not work? Read Answer
    • 207 2006-2015 - What problems does the Peugeot 207 ABS have? Read Answer
    • 207 2006-2015 - How to solve an anti-theft anomaly on the Peugeot 207? Read Answer
    • 207 2006-2015 - Why is the soft top of the Peugeot 207 CC not working? Read Answer
    • 207 2006-2015 - What are the warning lights of the Peugeot 207? Read Answer
    • 207 2006-2015 - Why is the Peugeot 207 ABS not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos