Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Tire pressure warning light

In this tutorial, you will learn how to reset the tyre pressure warning light on the Peugeot 208; before performing the operation, it is necessary to have resolved the issue that caused the light to come on. First, get into the vehicle and turn on the ignition; then locate the reset button for the tyre pressure warning light on the switch panel under the steering wheel (the button marked "set"), as shown in the video. Press and hold the button to reset the TPMS warning light, so it is cleared from the instrument panel!

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Peugeot 208
How to Reset the Tyre Pressure Light on a Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) If the orange light indicating low tyre pressure comes on in your Peugeot 208, follow this simple procedure to reset it. With the key in the ignition…
How to reset the TPMS warning light on the Peugeot 208
How to reset the TPMS warning light on the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) When the TPMS light remains on on the instrument panel of your second generation Peugeot 208 even in the absence of a puncture and with all tires inf…
How to Reset the Low Tyre Pressure Warning Light on the Peugeot 208?
How to Reset the Low Tyre Pressure Warning Light on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) If you notice that the low tyre pressure warning light has illuminated while driving, first check the actual pressures of all four tyres and restore …

Other guides you may be interested in

    Frequently Asked Questions

    • 208 2019-2026 - Where is the tire pressure warning light in the Peugeot 208? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos