Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Front Headlight Bulbs on a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Headlight bulb

This guide provides instructions for removing and replacing the front headlight bulbs on a Peugeot 3008. First, open the bonnet and remove the plastic cover protecting the bulbs. Then, disconnect the electrical connector from the bulb to release it from the holder. Next, install the new dipped beam bulb or the position bulb; to access the bulbs on the right side, you will need to remove the intake hose. Finally, refit the lights onto the headlamp assembly!

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Peugeot 3008
How to replace the front headlight bulb of the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) The steps to replace the front headlight bulb of the Peugeot 3008 are: -Open the front hood of the car; -Remove the cap of the headlight dome; -Disco…
How to replace the front headlight bulb of the 2017 Peugeot 3008.
How to replace the front headlight bulb of the 2017 Peugeot 3008.
Peugeot 3008 (2016-2023 / MK 2, P84) The steps to follow to replace the front headlight bulb of the Peugeot 3008 are: - open the front hood; - remove the cap from the headlight dome; - d…
Replacement of the front headlight bulb of the Peugeot 3008
Replacement of the front headlight bulb of the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) The instructions in this guide will show us how to disassemble and replace the headlight bulb of the Peugeot 3008. First, we open the hood of the car…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos