Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to replace headlight bulbs on Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Side turn signal light bulb
Operation: How to replace headlight bulbs on Peugeot 3008

Do you want to replace the bulbs of the indicator located in the headlight on Peugeot 3008? Let's see how to proceed: open the front hood, pulling the lever located at the bottom right of the dashboard, let's secure it with the rod. Once you have found the inspection cap of the headlight (located in the rear part of the headlight), remove it, we will find the bulbs with metal hooks; we take out the lamp holders from the lighthouse and we go to extract the damaged bulb with the help of a screwdriver. We mount the new bulb and (always suitable type and size) we insert the lamp holder in the lighthouse housing. We test the correct functioning of the lights.


Posted on 28 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos