Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs in a Peugeot 3008?

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Headlight bulb

In this tutorial, you will see how to replace the front headlight bulbs in a Peugeot 3008. This is a very simple and quick task. Before doing this, ensure that the key is not inserted for safety. Start by opening the bonnet, then locate the headlight in question and remove the large circular cap at the back. Next, disconnect the power connector, unclip the metal clip, and extract the old bulb from the housing. Finally, insert the replacement bulb, taking care not to touch it directly with your bare hands, as any residues could cause it to overheat.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs of a Peugeot 3008
How to Replace the Front Headlight Bulbs of a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Let's see how to replace the front headlight bulbs of a Peugeot 3008: open the front bonnet by pulling the lever located at the bottom right of the d…
Replacing Front Bulb on Peugeot 3008
Replacing Front Bulb on Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Let’s look at removing the front headlight bulbs of a Peugeot 3008. Lift the front bonnet of the car, unscrew the securing screws to remove the headl…
How to Replace the Front Headlight Bulb on the Peugeot 3008
How to Replace the Front Headlight Bulb on the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Today, we will see how to replace the front headlight bulbs on the Peugeot 3008 Phase One. The bulbs we will use are HP24W. Pull the lever to open th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos