Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the BSI Unit on the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Warning light – error code

Video tutorial

This guide explains how to reset the BSI unit on the Peugeot 206, following the instructions below. First, open the bonnet of your car and disconnect the negative terminal of the battery by unscrewing the nut; then wait about three minutes before reconnecting the negative terminal.

Next, get inside the vehicle and insert the key into the ignition, pressing the lock button ten times; exit the vehicle and press the unlock button another ten times. Then turn on the ignition to complete the reset operation!


Updated on 2 July 2026 by ScegliAuto


Related tutorials

Reset BSI, how to perform the reset on the Peugeot 206.
Peugeot 206 (1998-2012 / MK 1) On the Peugeot 206, the BSI reset is performed with the vehicle turned off, following the sequence shown in the video: secure the vehicle, deactivate…
How to Reset the BSI on a Peugeot 206
How to Reset the BSI on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, see how to reset the BSI on a Peugeot 206: BSI stands for Built-in System Interface and is a system introduced by the PSA group in 200…
How to Diagnose the Alarm Fault on a Peugeot 206
How to Diagnose the Alarm Fault on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) A common issue on the Peugeot 206 is the alarm system indicating a fault when starting the vehicle; you might think it’s a key recognition failure, b…

    Frequently Asked Questions

    • 206 1998-2012 - What does the flashing STOP lamp mean on the Peugeot 206? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos